Skip to main content

Working Capital Management Explained

Working capital management is how a business manages its inventory, receivables, payables and cash so it can pay its bills on time without tying up more money than it needs. This tutorial explains each part with worked examples, from the cash operating cycle and EOQ to settlement discounts, cash models and overtrading.

What is working capital management?

Working capital is current assets minus current liabilities. In practice that means inventory, trade receivables and cash, less trade payables and other short-term debts such as an overdraft.

Working capital management is the job of deciding how much to hold in each of these and how to finance it. It has two objectives that pull against each other:

  • Liquidity: enough cash and near-cash to pay suppliers, staff and lenders when they are due.
  • Profitability: money sitting in inventory, receivables or idle cash earns nothing, so holding too much lowers the return on the business.

Hold too little and the business risks running out of cash. Hold too much and it wastes capital. Good working capital management finds a sensible point between the two.

Working capital management is section C of ACCA Financial Management (FM), and one of the areas the two 20-mark section C questions mainly come from. In CIMA it is section D of F1, Managing cash and working capital, worth 25% of the exam.

The cash operating cycle

The cash operating cycle (also called the working capital cycle) is the time between paying for inventory and receiving cash from customers. The longer the cycle, the more cash the business has tied up.

Cash operating cycle = inventory days + receivable days - payable days

  • Inventory days = inventory / cost of sales x 365
  • Receivable days = trade receivables / credit sales x 365
  • Payable days = trade payables / credit purchases x 365 (use cost of sales if purchases are not given)

In a manufacturer, inventory days split into raw materials, work in progress and finished goods, each measured against the relevant cost.

Worked example

A company has credit sales of £3,650,000 and cost of sales of £2,190,000, with all purchases on credit and equal to cost of sales. At the year end it holds inventory of £300,000, receivables of £500,000 and payables of £240,000.

  • Cost of sales per day is £2,190,000 / 365 = £6,000, so inventory days are £300,000 / £6,000 = 50 days.
  • Sales per day are £3,650,000 / 365 = £10,000, so receivable days are £500,000 / £10,000 = 50 days.
  • Payable days are £240,000 / £6,000 = 40 days.
  • The cash operating cycle is 50 + 50 - 40 = 60 days.

If the company collected from customers in 40 days instead of 50, receivables would fall by 10 x £10,000 = £100,000. That is £100,000 of cash released without selling anything extra.

Working capital ratios

Carry on with the example and add cash of £50,000 and an overdraft of £160,000. Current assets are £850,000 and current liabilities are £400,000.

  • Current ratio = current assets / current liabilities = £850,000 / £400,000 = 2.1 times.
  • Quick ratio (acid test) = (current assets - inventory) / current liabilities = £550,000 / £400,000 = 1.4 times.
  • Sales revenue / net working capital = £3,650,000 / £450,000 = 8.1 times. It shows how much revenue each pound of working capital supports.
  • Inventory, receivable and payable days, as above.

There is no single right answer for any ratio. Compare with last year and with similar businesses. A supermarket can run happily with a current ratio below 1 because it sells inventory fast and is paid in cash, while a manufacturer usually needs more.

Managing inventory: the EOQ

The economic order quantity (EOQ) is the order size that minimises the total of ordering costs and holding costs.

EOQ = square root of (2 x Co x D / Ch)

  • Co is the cost of placing one order.
  • D is annual demand in units.
  • Ch is the cost of holding one unit for a year.

Worked example

Annual demand is 40,000 units, each order costs £50 to place, and holding one unit costs £4 a year.

EOQ = square root of (2 x 50 x 40,000 / 4) = square root of 1,000,000 = 1,000 units.

Check it: the company places 40,000 / 1,000 = 40 orders, costing 40 x £50 = £2,000. Average inventory is 1,000 / 2 = 500 units, costing 500 x £4 = £2,000 to hold. Total cost is £4,000. At the EOQ, annual ordering cost equals annual holding cost, which is a useful check in the exam.

If a supplier offers a bulk purchase discount for larger orders, compare total cost (purchase price plus ordering plus holding) at the EOQ and at each discount threshold, and pick the lowest. Just-in-time (JIT) takes the other approach: keep inventory close to zero and rely on reliable, frequent deliveries.

Managing receivables

Credit control starts before the sale: assess creditworthiness with references, credit ratings and the customer's accounts, set credit limits, invoice promptly and chase overdue amounts.

The cost of an early settlement discount

Offering a discount for early payment brings cash in faster, but it has a cost. Work out the annual cost and compare it with the company's cost of finance, such as its overdraft rate.

Annual cost = (1 + d / (100 - d)) to the power of (365 / t) - 1

Here d is the discount percentage and t is the number of days earlier the customer pays.

Example: customers normally pay in 30 days. The company offers 2% for payment within 10 days, so t = 20.

  • Cost for 20 days = 2 / 98 = 2.04%.
  • There are 365 / 20 = 18.25 such periods in a year.
  • Annual cost = 1.0204 to the power of 18.25 - 1 = about 44.6%.

That is far more than a typical overdraft costs, so offering this discount would be expensive. From the customer's side the same sum explains why taking a supplier's discount is often worth it. A simple interest version (2.04% x 18.25 = 37.2%) understates the cost.

Factoring and invoice discounting

  • Factoring: a factor takes over the sales ledger. It can advance cash against invoices, collect the debts and, with non-recourse factoring, carry the bad debt risk, all for fees and interest. Evaluate it by comparing the factor's costs with the admin savings, lower bad debts and the interest saved by getting cash sooner.
  • Invoice discounting: a lender advances cash against selected invoices, but the company still collects its own debts, so customers need not know.

For foreign customers, add the risks of exchange rate movements and collection across borders. Tools include export credit insurance, letters of credit and forward contracts.

Managing payables

Trade credit is a free source of finance until the business starts missing a discount or damaging supplier relationships. Pay on the agreed date, not early, unless a settlement discount is worth taking, and use the formula above to decide. Stretching payables too far risks losing supplies, higher prices and a poor credit rating.

Managing cash

Businesses hold cash to pay day-to-day bills, to cover unexpected needs and to take opportunities. Start with a cash flow forecast to spot shortfalls and surpluses in advance. Surplus cash can be invested short term, and a central treasury can pool cash across a group.

The Baumol model

Baumol treats cash like inventory. It finds the best amount to convert from investments to cash each time:

Q = square root of (2 x C x S / i)

C is the cost of each transfer, S is the annual cash requirement and i is the interest rate earned on investments.

Example: a company needs £1,800,000 of cash a year, each transfer costs £40 and investments earn 4%. Q = square root of (2 x 40 x 1,800,000 / 0.04) = £60,000. It makes 30 transfers a year. Its weakness is that it assumes steady, predictable cash use.

The Miller-Orr model

Miller-Orr suits cash flows that move up and down unpredictably. Management sets a lower limit, and the model sets an upper limit and a return point:

  • Spread = 3 x (3/4 x transaction cost x variance of daily cash flows / daily interest rate) to the power of 1/3
  • Upper limit = lower limit + spread
  • Return point = lower limit + spread / 3

Example: the lower limit is £10,000, each transaction costs £50, the standard deviation of daily cash flows is £8,000 (variance 64,000,000) and the daily interest rate is 0.03%. Spread = 3 x (0.75 x 50 x 64,000,000 / 0.0003) to the power of 1/3 = 3 x 20,000 = £60,000. The upper limit is £70,000 and the return point is £30,000. When cash hits £70,000, the company invests £40,000. When it falls to £10,000, it sells £20,000 of investments.

A common slip is using the standard deviation instead of the variance.

Funding working capital

Some current assets are permanent (the minimum level always held) and some fluctuate. A matching policy finances permanent assets long term and fluctuating ones short term. A conservative policy uses more long-term finance: safer but more expensive. An aggressive policy uses more short-term finance: cheaper but riskier if lenders withdraw. See our guide to sources of long-term finance .

Overtrading

Overtrading is when a business grows sales faster than its working capital can support. It is profitable on paper but runs out of cash. Warning signs:

  • A fast rise in revenue with little new long-term capital.
  • Rising inventory and receivable days.
  • Payable days stretching as suppliers wait longer.
  • Falling current and quick ratios and a growing overdraft.

The cures are new long-term finance (often equity), slower growth, or tighter control of inventory and receivables.

Study working capital with VIVA

Our ACCA FM course covers working capital management in 21 lessons across four modules: the operating cycle and ratios, inventory, payables and receivables, and cash and funding policies. The full course has 184 lessons and two practice exams. If you are studying CIMA, working capital is section D of our CIMA F1 course . See ACCA prices and CIMA prices .

For exam planning, see the best order for ACCA exams , which ACCA exams to take together , how to pass ACCA exams first time and how to pass CIMA objective tests .

Sources: ACCA Financial Management syllabus and study guide, September 2026 to June 2027 , CIMA Operational level examination blueprint, objective tests January 2026 to January 2027 , checked 7 November 2026.

Frequently asked questions

What is the difference between working capital and the working capital cycle?

Working capital is an amount: current assets minus current liabilities. The working capital cycle is a length of time: how long cash is tied up between paying suppliers and being paid by customers.

Is a longer cash operating cycle bad?

Not always, but it means more cash is tied up and more finance is needed. Compare it with the previous year and with similar businesses before deciding.

Do I need to learn the EOQ formula?

For CIMA F1, yes: the blueprint lists no formulae for F1. For ACCA FM you get a formulae sheet in the exam, but you still need to know what each term means and how to use it.

What is overtrading?

Growing sales faster than the business's working capital and long-term finance can support, so it runs short of cash even while it is profitable.

Is working capital management in ACCA or CIMA?

Both. It is section C of ACCA Financial Management (FM) and section D of CIMA F1 Financial Reporting.